{"id":39772,"date":"2023-01-04T17:03:52","date_gmt":"2023-01-04T16:03:52","guid":{"rendered":"https:\/\/www.gt-engineering.it\/?post_type=normativa_tecnica&p=39772"},"modified":"2025-01-31T17:23:06","modified_gmt":"2025-01-31T16:23:06","slug":"4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs","status":"publish","type":"normativa_tecnica","link":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/","title":{"rendered":"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l’acc\u00e8s des membres sup\u00e9rieurs"},"content":{"rendered":"\n\n \n \n \n
\n\n \n \n \n
\n \n
\n

Dans ce chapitre, les distances de s\u00e9curit\u00e9 pour prot\u00e9ger les membres sup\u00e9rieurs sont d\u00e9taill\u00e9es<\/p>\n

 <\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tendre vers le haut <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n
\n \n
\n

La figure montre le cas qui sera analys\u00e9 :<\/p>\n

1. Zone de danger<\/p>\n

2. Plan de r\u00e9f\u00e9rence<\/p>\n

h. Hauteur de la zone de danger<\/p>\n

La nouvelle version de la norme d\u00e9finit le plan de r\u00e9f\u00e9rence comme suit
\ncomme le niveau au-dessus duquel les personnes se tiennent normalement pendant l’utilisation de la machine ou \u00e0 partir duquel elles ont acc\u00e8s \u00e0 la zone dangereuse.<\/p>\n

Comme expliqu\u00e9 dans l’introduction, pour d\u00e9finir la hauteur (h), il est n\u00e9cessaire d’\u00e9valuer le risque associ\u00e9 \u00e0 la zone dangereuse.<\/p>\n

 <\/p>\n

La hauteur de la zone dangereuse varie en fonction du niveau de risque. En particulier :<\/p>\n

– Risque faible – h = 2500 mm (ou plus)
\n– Risque \u00e9lev\u00e9 – h = 2700 mm (ou plus)<\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Atteinte \u00e0 la structure de protection <\/h2>\n <\/div>\n <\/div>\n \n \n
\n \n
\n

 <\/p>\n

Consid\u00e9rez la figure \u00e0 proximit\u00e9, \u00e9tant :<\/p>\n

a. Hauteur du point le plus proche de la zone de danger
\nb. Hauteur de la structure de protection
\nc. Distance de s\u00e9curit\u00e9 horizontale par rapport \u00e0 la zone dangereuse
\n1. Zone dangereuse (point le plus proche)<\/p>\n

La norme fournit deux tableaux permettant d’obtenir les distances, l’un en cas de risque faible et l’autre en cas de risque \u00e9lev\u00e9. Les tableaux sont pr\u00e9sent\u00e9s ci-dessous.<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tableau 1 – D\u00e9passement de la structure de protection (risque faible) <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n \n \n
<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tableau 2 – D\u00e9passement de la structure de protection (risque \u00e9lev\u00e9) <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n \n \n
<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Atteindre les alentours <\/h2>\n <\/div>\n <\/div>\n \n \n
\n \n
\n

Le tableau 3 pr\u00e9sente des exemples de mouvements fondamentaux pour des personnes de 14 ans et plus (environ 1,4 m de hauteur et plus). Des distances de s\u00e9curit\u00e9 inf\u00e9rieures \u00e0 850 mm (voir tableau 4) peuvent \u00eatre utilis\u00e9es lorsque l’obstacle limitant le mouvement mesure au moins 300 mm de long.<\/p>\n

 <\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tableau 3 – Atteindre les alentours <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n \n \n
<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Atteindre les ouvertures habituelles <\/h2>\n <\/div>\n <\/div>\n \n \n
\n \n
\n

En ce qui concerne l’atteinte des dangers par les ouvertures, la norme \u00e9tablit une distinction entre les personnes \u00e2g\u00e9es d’au moins 14 ans et les personnes \u00e2g\u00e9es d’au moins 3 ans (pour les lieux publics). Il est clair que dans le second cas, les dimensions plus petites des membres sont prises en compte.<\/p>\n

En fonction des dimensions de l’ouverture et de sa forme, la norme d\u00e9finit la distance \u00e0 laquelle le danger doit se trouver, afin d’emp\u00eacher qu’il soit atteint au moyen des doigts, des mains ou des bras. Dans le cas des enfants, cette distance est plus \u00e9lev\u00e9e. Les tableaux sont pr\u00e9sent\u00e9s ci-dessous.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tableau 4 – Atteindre les ouvertures habituelles (14 ans ou plus) <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n \n \n
<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Tableau 5 – Atteindre les ouvertures habituelles (3 ans ou plus) <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n \n \n
<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n \n \n
\n \n
\n

Pour donner un exemple, consid\u00e9rons le tableau 4 et supposons qu’il y a une ouverture carr\u00e9e dont les c\u00f4t\u00e9s sont compris entre 12 et 20 mm. Un doigt pourrait donc passer compl\u00e8tement \u00e0 travers une telle ouverture. Dans ce cas, la zone de danger doit \u00eatre \u00e9loign\u00e9e d’au moins 120 mm de l’ouverture.<\/p>\n

Lorsque cette distance est sup\u00e9rieure \u00e0 120 mm ou \u00e0 100 mm dans le cas des enfants, la norme exige de tenir compte de ce qui est \u00e9crit pour le contact atteignant la structure de protection.<\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n\n\n\n\n \n \n \n
\n\n \n
\n \n
\n \n \n

\n Atteindre des ouvertures inhabituelles <\/h2>\n <\/div>\n <\/div>\n \n \n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n <\/picture>\r\n\r\n \r\n\r\n \r\n \r\n <\/div>\n \n
\n \n
\n

Dans le cas d’ouvertures irr\u00e9guli\u00e8res, les \u00e9tapes suivantes sont ex\u00e9cut\u00e9es dans l’ordre indiqu\u00e9.
\na) D\u00e9terminer
\n– le diam\u00e8tre de la plus petite ouverture ronde,
\n– le c\u00f4t\u00e9 de la plus petite ouverture carr\u00e9e, et
\n– la largeur de l’ouverture la plus \u00e9troite dans laquelle l’ouverture irr\u00e9guli\u00e8re peut \u00eatre compl\u00e8tement ins\u00e9r\u00e9e.
\nb) Choisir les trois distances correspondantes selon le tableau 4 ou le tableau 5.
\nc) La distance de s\u00e9curit\u00e9 la plus courte des trois valeurs s\u00e9lectionn\u00e9es en b) peut \u00eatre utilis\u00e9e.<\/p>\n<\/div> <\/div>\n \n \n

<\/div>\n \n\n <\/div>\n <\/section>\n\n \n","protected":false},"excerpt":{"rendered":"

Dans ce chapitre, les distances de s\u00e9curit\u00e9 pour prot\u00e9ger les membres sup\u00e9rieurs sont d\u00e9taill\u00e9es<\/p>\n","protected":false},"author":182,"featured_media":39773,"parent":39763,"menu_order":0,"template":"","meta":{"_acf_changed":false,"footnotes":""},"normative-tecniche":[164],"class_list":["post-39772","normativa_tecnica","type-normativa_tecnica","status-publish","has-post-thumbnail","hentry","tipologia_normativa-normes-en-iso"],"acf":{"sottotitolo":"EN ISO 13857 et distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs","allegati":null},"yoast_head":"\n4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering\" \/>\n<meta property=\"og:description\" content=\"Dans ce chapitre, les distances de s\u00e9curit\u00e9 pour prot\u00e9ger les membres sup\u00e9rieurs sont d\u00e9taill\u00e9es\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/\" \/>\n<meta property=\"og:site_name\" content=\"Gt-Engineering\" \/>\n<meta property=\"article:modified_time\" content=\"2025-01-31T16:23:06+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"304\" \/>\n\t<meta property=\"og:image:height\" content=\"379\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data1\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/\",\"url\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/\",\"name\":\"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering\",\"isPartOf\":{\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp\",\"datePublished\":\"2023-01-04T16:03:52+00:00\",\"dateModified\":\"2025-01-31T16:23:06+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage\",\"url\":\"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp\",\"contentUrl\":\"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp\",\"width\":304,\"height\":379},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\/\/www.gt-engineering.it\/fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Normes techniques\",\"item\":\"https:\/\/www.gt-engineering.it\/fr\/normative-tecniche\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Normes ISO\",\"item\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"EN ISO 13857: Distance de s\u00e9curit\u00e9\",\"item\":\"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normative-en-iso\/en-13857-distanze-di-sicurezza\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l’acc\u00e8s des membres sup\u00e9rieurs\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.gt-engineering.it\/fr\/#website\",\"url\":\"https:\/\/www.gt-engineering.it\/fr\/\",\"name\":\"Gt-Engineering\",\"description\":\"bizonweb\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.gt-engineering.it\/fr\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/","og_locale":"fr_FR","og_type":"article","og_title":"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering","og_description":"Dans ce chapitre, les distances de s\u00e9curit\u00e9 pour prot\u00e9ger les membres sup\u00e9rieurs sont d\u00e9taill\u00e9es","og_url":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/","og_site_name":"Gt-Engineering","article_modified_time":"2025-01-31T16:23:06+00:00","og_image":[{"width":304,"height":379,"url":"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Dur\u00e9e de lecture estim\u00e9e":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/","url":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/","name":"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l'acc\u00e8s des membres sup\u00e9rieurs - Gt-Engineering","isPartOf":{"@id":"https:\/\/www.gt-engineering.it\/fr\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage"},"image":{"@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp","datePublished":"2023-01-04T16:03:52+00:00","dateModified":"2025-01-31T16:23:06+00:00","breadcrumb":{"@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#primaryimage","url":"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp","contentUrl":"https:\/\/www.gt-engineering.it\/wp-content\/uploads\/2023\/07\/Altezza-zona.png.webp","width":304,"height":379},{"@type":"BreadcrumbList","@id":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/en-iso-13857-distance-de-securite\/4-2-distances-de-securite-pour-empecher-lacces-des-membres-superieurs\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/www.gt-engineering.it\/fr\/"},{"@type":"ListItem","position":2,"name":"Normes techniques","item":"https:\/\/www.gt-engineering.it\/fr\/normative-tecniche\/"},{"@type":"ListItem","position":3,"name":"Normes ISO","item":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normes-en-iso\/"},{"@type":"ListItem","position":4,"name":"EN ISO 13857: Distance de s\u00e9curit\u00e9","item":"https:\/\/www.gt-engineering.it\/fr\/reglements-techniques\/normative-en-iso\/en-13857-distanze-di-sicurezza\/"},{"@type":"ListItem","position":5,"name":"4.2 Distances de s\u00e9curit\u00e9 pour emp\u00eacher l’acc\u00e8s des membres sup\u00e9rieurs"}]},{"@type":"WebSite","@id":"https:\/\/www.gt-engineering.it\/fr\/#website","url":"https:\/\/www.gt-engineering.it\/fr\/","name":"Gt-Engineering","description":"bizonweb","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.gt-engineering.it\/fr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"}]}},"_links":{"self":[{"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normativa_tecnica\/39772","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normativa_tecnica"}],"about":[{"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/types\/normativa_tecnica"}],"author":[{"embeddable":true,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/users\/182"}],"version-history":[{"count":3,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normativa_tecnica\/39772\/revisions"}],"predecessor-version":[{"id":47065,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normativa_tecnica\/39772\/revisions\/47065"}],"up":[{"embeddable":true,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normativa_tecnica\/39763"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/media\/39773"}],"wp:attachment":[{"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/media?parent=39772"}],"wp:term":[{"taxonomy":"tipologia_normativa","embeddable":true,"href":"https:\/\/www.gt-engineering.it\/fr\/wp-json\/wp\/v2\/normative-tecniche?post=39772"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}